Select the Right Shielded Cable for your Network

Shielded cables are required when using a wired connection to connect computers to ports, computers, or hubs. The use of shielded cable affects internet connectivity and bandwidth. To choose the best Ethernet cable, think about what to look for in a shielded cable, as well as the cable’s function, length, and access network.

When your data is at risk of disturbance and interference, shielded cable is required. As a result, if you’re putting up an ethernet connection in an environment with a lot of interference, you’ll need a shielded cable like Cat6 shielded riser. Shielded cables are the most effective as they are more expensive, they are rarely utilized in home networking and preventing interference from external devices while also providing greater performance.

You must choose the appropriate category based on your requirements. Cat5e is preferred by most homes and businesses since it can be used with a modem internet connection and can transmit data at speeds of up to 100 Mbps. For many households and businesses, this is a reliable speed. As shielded cable are expensive, but they will last a long time.

Length of cables:

It’s crucial to think about the length of the shielded cable before buying it. A shielded cable that is too short will be ineffective. You should first measure the available space before purchasing a shielded cable, and then get a longer cable. Based on a reasonable estimate of the space available, purchase shielded cables. You might just purchase cables without ends and cut them to suit the plugs you need later. Such cables are designed to connect two devices, such as a network and a switch, or a computer as well as a switch or hub.

Choose the right Cable for Network:

  • You must first determine your network connectivity before selecting the appropriate cable category. If your connection speeds are up to 100 Mbps, Cat 5 or Cat 5E are the best options.
  • If you prefer speedier connections, Cat 6 is the way to go.
  • Next, figure out how much cable you’ll need.
  • You must conduct thorough study to find the best cable for your home network.
  • Check the internet speed, cable length, and cable type that you want. Invest in Cat 6 cables if you’re upgrading your current network.
  • Electric noise is reduced by shielded cables. In other words, they help in the strengthening of the signal and the reduction of disturbance from other.
  • If you want to utilize shielded Cat5e cable, you get to know the most speed and performance out of your connection.
  • If you are using shielded Cat 5e during first way, you didn’t have to worry about removing the cable from of the ceiling if you need to replace it.

Separating the entire shield from the cable just takes a short amount of time. Ground loop currents and accompanying interference to the Ethernet signal can occur if the grounding is incorrect. In the worst-case scenario, if the shields are not properly grounded, they can operate as an antenna, causing interference.

Shielded cables and connectors must be required to reduce or remove EMI/RFI interference. To offer the best level of EMI protection, shielded cables frequently use both foil and braided shields. It’s critical to employ shielded cable, shielded connector, and protected connecting points like patch panels when constructing a shielded cable plant to ensure that the shielding is effective against EMI.


While selecting a shielded cable make sure to concern within a budget is important, it’s important to remember that the difference in cost between Cat5e and Cat6. The bandwidth requirements play a much bigger role in deciding which what kind of cabling is better suited for your demands.

Cat 6 shielded riser:

Cat6 Shielded Riser cable is ideal for setups that require additional signal interfering safety. This shielded Cat6 riser cable stands as a horizontal backbone inside the ceiling of your homes or workplace. The cable’s pure copper solid conductors make it ideal for lengthy runs of up to 328 feet (100 meters). For unique installations, it comes in 1000- and 250-foot lengths. This will improve your performance when it comes to near-end crosstalk between both the wires. Use this shielded Cat 6 riser cable with our shielded keystone jacks or shielded RJ45 flexible plugs for a low connection that is free of transmission errors.